JBL SYNTHESIS SDP-40 User Manual

Also see for SYNTHESIS SDP-40: User guide

JBL SYNTHESIS SDP-40 User Manual Manual pdf 81 page image

SETUP JBL3-41REAR PANEL CONFIGSelecting the SETUP menu REAR PANEL CONFIG option opens theREAR PANEL CONFIG menu shown below, which can be used toconfigure the analog audio input connectors as eight stereoconnectors or as five stereo and one 5.1-channel connectors.REAR PANEL CONFIGSETUP8 STEREO INPUTSSelect the 8 STEREO INPUTS option to configure the analog audioinput connectors as eight stereo connectors.When 8 STEREO INPUTS is selected:• All analog audio input connectors are configured as stereoconnectors.• The 5.1-channel connector is not available.• Input sources that were assigned to the 5.1-channel connectorare reassigned to the stereo connectors labeled 6, 7, and 8.8 STEREO INPUTSREAR PANEL CONFIGSETUP5 STEREO & 5.1 ANLGSelect the 5 STEREO & 5.1 ANLG option to configure the analogaudio input connectors as five stereo and one 5.1-channelconnectors.When 5 STEREO & 5.1 ANLG is selected:• The analog audio input connectors labeled 1, 2, 3, 4, and 5 areconfigured as stereo connectors.• The analog audio input connectors labeled 6, 7, and 8 areconfigured as a 5.1-channel connector.• Input sources that were assigned to the stereo connectorslabeled 6, 7, and 8 are reassigned to the 5.1-channel connectorlabeled 6, 7, and 8.• The 5.1-channel connector is sent to the Main Zone audiooutput connectors as indicated in the table below.• The 5.1-channel connector should only be used with 5.1-channelanalog sources such as DVD-As and SACDs.Input Connector(s) Output Connector(s)(L) & (R) Front L/R(C) Center(SUB) Subwoofer L/R & LFE(LS) & (RS) Side L/R & Rear L/R5 STEREO & 5.1 ANLGREAR PANEL CONFIGSETUPMAIN MENUMODE ADJUSTAUDIO CONTROLSSETUPSETUPSETUPINPUTSSPEAKERSREAR PANEL CONFIGDISPLAYSVOLUME CONTROLSTRIGGERSLOCK OPTIONSREAR PANEL CONFIG5 STEREO & 5.1 ANLGFOR REAR PANEL CFG8 STEREO INPUTSFOR REAR PANEL CFGREAR PANEL CONFIG8 STEREO INPUTSOR5 STEREO & 5.1 ANLG