JBL Soundpoint SP5 Owner's Manual

Also see for SOUNDPOINT SP5: Owner's guide Owner's guide Owner's guide

Contents

6SP6C, SP6CS, SP8CEXISTING CONSTRUCTIONRemove the grille from thespeaker frame by pulling on thepaper tab. If the tab is missing,to avoid scratching the grille orbaffle you may unfold a paperclip, insert the straight endthrough one of the holes in thegrille, and gently pull up.≥1/2"≥1/2"≥1/2"Cut the drywall.Note: Always allow at leastone-half inch between a wallstud and the speaker cutout orthe locking tabs will not be ableto swivel into place.Connect the speaker wires tothe speaker. Model SP6CSrequires two sets of speakerwires, one for each channel.Place the frame assembly inthe wall.Screw down each of the fourPhillips head screws. The lock-ing tabs will swivel into placeand secure the unit to the rearsurface of the drywall.Replace the metal grille.Determine the correct speakerlocation.Note: Remove the inner tem-plate, which is the paint shield,at the perforation. Use theouter template when cuttingthe drywall.The SoundPoint speakers fea-ture unique swivel mounts forthe tweeters that enable you toaim the very directional highfrequencies toward the listen-ing position, at ear-level height.Before installing the speakergrille, gently press on the outeredge of the tweeter mount toadjust the position of thetweeter. The tweeter will notswivel more than 15 degrees inany direction; do not attempt toforce it to move further. Youmay also rotate the tweeter toorient the JBL logo as desired.The dual tweeters of the SP6CSspeaker may be swiveled inde-pendently. Optimum imagingwill be obtained by aiming thetweeters to the left and right ofthe listening position, at ear-level height, if your applicationpermits.ENGLISH

/ 8

Related manuals for JBL SOUNDPOINT SP5