JETWAY ALIOTH User Manual
                                                | |
Contents
| 
32CMOS Setup Utility – Copyright(C) 1984-2002 Award SoftwarePC Health StatusItem HelpShutdown Temperature DisabledCPU Warning Temperature DisabledShow PC Health in Post EnabledCurrent System Temperature 25°CCurrent CPU Temperature 38°CCurrent CPUFAN Speed 5000 rpmCurrent SYSFAN Speed 5000 rpmCurrent SYSFAN2 Speed 5000 rpmVcore 1.71VVcc1.5 1.51VVcc3.3 3.31V+ 5V 4.98V+12V 12.22V-12V -12.36V- 5V -4.99VVBAT(V) 3.21V5VSB(V) 5.02VMenu Level >↑ ↓ → ← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General HelpF5:Previous Values F6:Optimized Defaults F7:Standard DefaultsShow PC Health in PostDuring Enabled, it displays information list below. The choice is either Enabled or Disabled.Current CPU Temperature/Current System Temp/Current FAN1, FAN2 Speed/Vcore/Vdd/3.3V/+5V/+12V/-12V/VBAT(V)/5VSB(V)This will show the CPU/FAN/System voltage chart and FAN Speed.Shutdown TemperatureThis item can let users setting the Shutdown temperature, when CPU temperature over this setting thesystem will auto shutdown to protect CPU.3-11 Miscellaneous ControlThis section is for setting CPU Frequency/Voltage Control.CMOS Setup Utility – Copyright(C) 1984-2002 Award SoftwareMiscellaneous ControlItem HelpCPU Clock Ratio X 8Auto Detect PCI Clk EnabledSpread Spectrum Disabled** Current Host Clock is 100/33MHz **HOST/PCI Clock at Next Boot is 100/33MHz** Current DRAM Clock is 133MHz **DRAM Clock at Next Boot is 133MHzPCI Clock Ratio Host/3CPU Vcore Select DefaultVcc1.5 Select 1.5VVDIMM Select 2.5VFlash Part Write Protect EnabledMenu Level >↑ ↓ → ← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General HelpF5:Previous Values F6:Optimized Defaults F7:Standard DefaultsAuto Detect PCI ClkThis item allows you to enable/disable auto detect PCI Clock.The settings are: Enabled, Disabled. |
Related manuals for JETWAY ALIOTH
manualsdatabase
Your AI-powered manual search engine