|
20• Press ↑ ↓ ← → (up, down, left, right) to choose, in the main menu, the option you wantto confirm or to modify.• Press when you have completed the setup of BIOS parameters to save theseparameters and to exit the BIOS Setup menu.• Press Page Up/Page Down or +/– keys when you want to modify the BIOS parametersfor the active option.3-1 Entering SetupPower on the computer and by pressing immediately allows you to enter Setup.If the message disappears before your respond and you still wish to enter Setup, restart thesystem to try again by turning it OFF then ON or pressing the “RESET” button on thesystem case. You may also restart by simultaneously pressing , and keys. If you do not press the keys at the correct time and the system does notboot, an error message will be displayed and you will again be asked toPress to continue, or to enter Setup3-2 Getting HelpMain MenuThe on-line description of the highlighted setup function is displayed at the bottom of thescreen.Status Page Setup Menu/Option Page Setup MenuPress F1 to pop up a small help window that describes the appropriate keys to use and thepossible selections for the highlighted item. To exit the Help Window, press .3-3 The Main MenuOnce you enter Award BIOS CMOS Setup Utility, the Main Menu (Figure 3-1) willappear on the screen. The Main Menu allows you to select from fourteen setup functionsand two exit choices. Use arrow keys to select among the items and press toaccept or enter the sub-menu.CMOS Setup Utility – Copyright(C) 1984-2002 Award SoftwareStandard CMOS FeaturesAdvanced BIOS FeaturesAdvanced Chipset FeaturesIntegrated PeripheralsPower Management SetupPnP/PCI ConfigurationsPC Health StatusMiscellaneous ControlLoad optimized DefaultsLoad Standard DefaultsSet Supervisor PasswordSet User PasswordSave & Exit SetupExit Without Saving
|
