JETWAY PM9M - REV 2.0 User Manual

Contents

JETWAY PM9M - REV 2.0 User Manual Manual pdf 35 page image

32The Award Plug and Play BIOS has the capacity to automatically configure all of the boot andPlug and Play compatible devices. However, this capability means absolutely nothing unlessyou are using a Plug and Play operating system such as Windows95/98. If you set this fieldto “manual” choose specific resources by going into each of the sub menu that follows thisfield (a sub menu is preceded by a “>”).The settings are: Auto(ESCD), Manual.IRQ ResourcesWhen resources are controlled manually, assign each system interrupt a type, depending onthe type of device using the interrupt.Please refer to section 3-9-1PCI/VGA Palette SnoopLeave this field at Disabled. The settings are Enabled, Disabled.3-9-1 IRQ ResourcesCMOS Setup Utility – Copyright(C) 1984-2004 Award SoftwareIRQ ResourcesItem HelpIRQ5 assigned to PCI DeviceIRQ7 assigned to PCI DeviceIRQ9 assigned to PCI DeviceIRQ10 assigned to PCI DeviceIRQ11 assigned to PCI DeviceIRQ12 assigned to PCI DeviceIRQ14 assigned to PCI DeviceIRQ15 assigned to PCI DeviceMenu Level >>↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General HelpF5:Previous Values F6:Optimized Defaults F7:Standard Defaults