JabloCom EYE-02 User Manual

Also see for EYE-02: User guide User guide User manual User manual Manual

Contents

JabloCom EYE-02 User Manual Manual pdf 11 page image

EYE-02 User Guide - 9 -CONFIG MODECONFIG mode allows the user to change camera’s settings, enroll a new external device (as remotecontrol) to cooperate with Camera or enroll a new user contact.To open CONFIG mode by remote control press and buttons together – red and green lightsstart blinks slowly together.ENROLLIn ENROLL mode camera allows to enroll new external wireless devices asremote controls, detectors, sirens, etc. Also a new contact – phone numbercan by enroll in this mode by just a simple call to camera. ENROLL mode isterminated automatically after one new items has been enrolled.TESTTEST mode is a special mode to test all detectors function without causingunwanted number of alarm reports.REPORT REPORT send press andbuttons togetherfor about 4 secNote: To protect camera safety the CONFIG mode and all its sub-modes will be closed automaticallyafter 5 minutes timeout.CONFIGURATION WITH PCThe most comfortable way how to set the camera parameters is using the PC computer withJabloTool software. JabloTool is available as a web service on www.jablotool.com which connects tocamera trough the GSM network or as a standard software to install on the PC connected withcamera by USB cable (on CD or www.jabblotool.com/download ).Note: the maximal length of USB cable is usually 5 meters.