Jabra BT 330 User Manual

Also see for BT330: Quick start guide User manual

Contents

Jabra BT 330 User Manual Manual pdf 5 page image

English5English109876544 “Pair” to your Bluetooth headset“Pair” to your Bluetooth headset“Pair” to your Bluetooth headset4 “Pair” to your Bluetooth headset4Pairing2 creates a unique wireless link between two Bluetooth devices, such as yourBluetooth phone and Bluetooth headset.1. Make sure the headset is turned off (see Turning headset on/off section).2. Press and hold the answer/end button until you see a solid blue light.3. Set your Bluetooth phone to “discover” the headset by following your phone’sinstruction guide. Typically, the steps involve going to a “setup”, “connect”, or“Bluetooth” menu on your phone and then selecting the option to “discover” aBluetooth device.4. When your phone finds the “Jabra BT330”, it asks if you want to pair with it. Confirmthis by selecting “yes” or “ok”.5. When your phone asks for a passkey or PIN4, enter 0000 (4 zeros) from yourkeypad and then press “yes” or “ok”.IMPORTANT: If pairing is successful, the blue indicator light flashes rapidly beforereturning to flashing every 3 seconds. If pairing is unsuccessful, the light remains solidand you’ll need to reattempt pairing (see steps 3–5 above).BASIC OPERATIONSTurningTurningTurning5 Turning5 headset on and offTo turn your headset on and off, press and hold the answer/end button until you see aburst of four flashes on the blue indicator light. A single tone indicates that the headsethas turned on or off.When the headset is on, the indicator light flashes. When it is off, the light is unlit.Note: Do not hold the button down for more than 3 to 5 seconds when turning theheadset on or else it may go into pairing mode and the blue indicator light will turnsolid. If that happens, turn off the headset, wait 3 to 5 seconds and then repeat theprocess for turning the headset on.IMPORTANT:Note66 Choosing wearing preferenceFor optimal performance, wear your Jabra BT330 and your Bluetooth phone on thesame side of your body. In general, you will get better performance when there are noobstructions (including parts of your body) between the headset and the phone. Theheadset ear grip is placed over the front of the ear. Your headset is ready to wear on theright ear, but you can adjust the ear grip to hang from your left ear. (See fig. 3)1. Hold the headset with the speaker facing you.2. Flip the ear grip down.3. Rotate the ear grip in a half-circle, counter clockwise.4. Place the headset over your left ear with the grip toward the front.Making a callMaking a callMaking a callMaking a call7 Making a call7Make sure the headset is turned on.Using the phone’s keypad dial the number on the keypad and then press the Send key.EndingEndingEndingEnding8 Ending8 a callTo end a call, press the answer/end button, or press the button to end a call on yourphone’s keypad.AnsweringAnsweringAnsweringAnswering9 Answering9 a callFrom the headset: When you hear the phone ring, press the answer/end button once.From the phone: Press the button to answer a call on your phone’s keypad. Dependingon your phone, you may then need to tap the answer/end button once to transfer thecall to your headset.TIPS AND SOLUTIONSEnhancedEnhancedEnhancedEnhanced10 Enhanced10 featuresEnhanced features are available for phones that support the hands-free BluetoothEnhanced features are available for phones that support the hands-free Bluetoothprofile4Enhanced features are available for phones that support the hands-free Bluetooth4Enhanced features are available for phones that support the hands-free Bluetooth, meaning you can use your headset wirelessly with your phone for somefeatures. Check your phone’s instruction guide or contact the phone manufacturerif you are not sure if your phone supports the hands-free Bluetooth profile.