Jabra BT150 User Manual

Also see for BT150 - Headset - Over-the-ear: Quick start guide User manual User manual

Contents

Jabra BT150 User Manual Manual pdf 5 page image

4 5Wear it how you like it4The Jabra BT150 is ready to wear on your right ear. If you prefer the left,gently flip and rotate the earhook 180°. (See fig. 2)For optimal performance, wear the Jabra BT150 and your mobile phoneon the same side of your body or within line of sight. In general, you willget better performance when there are no obstructions between yourheadset and your mobile phone. (See fig. 5)Answer a call• Tap the answer/end button on your headset to answer a callEnd a call• Tap the answer/end button to end an active callReject a call (Dependent on your phone supporting this feature)• Press the answer/end button when the phone rings to reject anincoming call. Depending on your phone settings, the person whocalled you will either be forwarded to your voice mail or hear a busysignalMake a call• When you make a call from your mobile phone, the call will (subject tophone settings) automatically transfer to your headsetActivate voice dialing (Dependent on your phone supporting thisfeature)• Tap the answer/end button. For best results, record the voice-dialingtag through your headset. Please consult your phone’s user manual formore information about using this featureRedial last number (Dependent on your phone supporting this feature)• Press the answer/end buttonAdjust sound and volume• Press the volume up or down (+ or –) to adjust the volume (See fig. 1)How to...5Before you use your Jabra BT150, you need to pair it with your mobile phone.1. Put the headset in pairing 2 modeMake sure that the headset is on.Press the answer/end button and press the volume up (+) button atthe same time, until a solid blue light comes on.2. Set your Bluetooth phone to ‘discover’ the Jabra BT150Follow your phone’s instruction guide. This usually involves going to a‘setup,’ ‘connect’ or ‘Bluetooth’ menu on your phone and selecting theoption to ‘discover’ or ‘add’ a Bluetooth device.* (See example from atypical mobile phone in fig. 4)3. Your phone will find the Jabra BT150Your phone then asks if you want to pair with it. Accept by pressing ‘Yes’or ‘OK’ on the phone and confirm with the passkey or PIN 3 = 0000(4 zeros).Your phone will confirm when pairing is complete. In case ofunsuccessful pairing, repeat steps 1 to 3.Pair it with your phone3Turn on your headset2• Press and hold the answer/end button to turn on your headset.• Press and hold the answer/end button to turn off your headset.What the lights mean6What you see What this means about your headsetFlashing blue light Flashing every second: active on a callFlashing blue light Flashing every three seconds: in standby mode4Flashing red light Running low on batterySolid blue light ChargingSolid blue light off Fully chargedSolid blue light In pairing mode – (See section 3)