6ENgLiShJabra bt20503. Your phone will find the Jabra BT2050• Your phone will find the headset under name “Jabra BT2050”.your phone then asks if you want to pair with the headsetAccept by pressing ‘Yes’ or ‘OK’ on the phone and confirm withthe passkey or PIN = 0000 (4 zeros). Your phone will confirmwhen pairing is completeJABRA BTx2050JABRA BT2050JABRA BTx2050In case of unsuccessful pairing, put the Jabra bt2050 into pairingmode manually. Make sure the headset is off. Press and hold theon/off button for approximately 5 seconds until the LED has aconstant light.The LED will flash before the light is constant –keep holding down the button until light is constantWEARiNg STyLEthe Jabra bt2050 is ready to wear It comes with 2 ear hooks indifferent sizes – a small one and a bigger one. Both are readyto clip on Wear the headset with ear hook or without It is yourchoicefor optimal performance, wear the Jabra bt2050 and your mobilephone on the same side of your body or within line of sightIn general, you will get better performance when there are noobstructions between your headset and your mobile phonehoW ToAnswer a call• Tap the answer/end button on your headset to answer a call.End a call• Tap the answer/end button to end an active call.