10 englishJabra bt530Transfer the call to the headset- t ap the answer/end button to transfer the call from the officephone to the headset via the Jabra bluetooth hubthe answering of a call from the office phone requires a hook lifterin order to have the Jabra bt530 answer the call automaticallyTroubleshooTing & faQI hear crackling noises- bluetooth is a radio technology, which means it is sensitive toobjects between the headset and the connected device It isdesigned for the headset and the connected device to be usedwithin 10 meters (33 feet) of each other, with no major objectsin the way (walls, etc )I cannot hear anything in my headset- Increase the volume in the headset- ensure that the headset is paired to a device that is playing- make sure your phone is connected to the headset by tappingthe answer/end buttonI am having pairing problems- you may have deleted your headset pairing connection in yourmobile phone follow the pairing instructionsI want to reset the headset- It is possible to reset and test the headset by ’pressing andholding’ all three buttoms at the same time the red, blueand green light will light up in a white light In this mode, thepairing list is reset, and you can test if the headset works as youwill be able to hear audio in the speaker from the microphone- the headset will automatically turn off after approx 10 secondsthe next time you power on, the headset will go into pairingmode as the first time you powered your new bt530 onWill the Jabra BT530 work with other Bluetooth equipment?- the Jabra bt530 is designed to work with bluetooth mobilephones It can also work with other bluetooth devices that arecompliant with bluetooth version 1 1 or higher and support aheadset, hands-free and/or advance audio distribution profile