14 englishJabra CrUISErWill the Jabra CRUISER work with other Bluetooth equipment?- The Jabra CrUISEr is designed to work with bluetooth mobilephones It can also work with other bluetooth devices that arecompliant with bluetooth version 1 1 or higher and supporta headset, hands-free and/or advance audio distribution profileI cannot use Reject call, call on hold, Redial or voice dialingThese features are dependent on the ability of your phone tosupport a hands-free profile Even if the handsfree profile isimplemented reject call, call hold and voice dialing are optionalfeatures which are not supported by all devices Please consultyour device manual for detailsPlease note that some features can only be operated from theprimary device e g voice dial using Jabra CrUISEr with 2 mobilephonesI can not connect speakerphone and radio via FM transmitter- Make sure the radio is turned on and speakerphone is in FMmode (FM Status Icon is on)- If your radio when searching is not able to find the FM frequencyset by your speakerphone, the FM frequency must be tunedin manually on the radio Please read radio manual to find outhow to manually change frequency on your radio- If your radio is in Ta (Traffic announcement) mode, switch Taoff and your radio should be able to find your speakerphonewhen using the search function on the radio If not tune inmanually- The sensitivity of the search function on your radio determineswhether it is able to find the frequency set by your speakerphoneOn some radios you are able to adjust the sensitivity thusmaking it possible to find the speakerphone frequency whensearching If not tune in manually- In urban areas it might be difficult to find a clear frequencyIt is therefore advisable to use a frequency in the lower or upperend of the FM frequency band (e g 88 1 or 107 7 MHz) whereyou will have the best chance to find a clear frequency
