9englishJabra EaSYGOIn order to use the headset with two mobile phone please makesure you have ”paired” the Jabra EaSYGO with both phones Seethe section “PaIrInG It WItH YOUr PHOnE” for instructionsOnce you have “paired” your headset with two phones simplymake sure your headset is on, and that Bluetooth® is enabled onthe phones and the headset will then automatically connect toboth phonesPlease note that Last number redial will dial the number fromthe last outgoing call, independent of the mobile phone, and theVoice Dialling function will only work on the last paired mobilephoneTROUBLESHOOTING & FAQI hear crackling noises- Bluetooth® is a radio technology, which means it is sensitive toobjects between the headset and the connected device It isdesigned for the headset and the connected device to be usedwithin 10 meters (33 feet) of each other, with no major objectsin the way (walls, etc )I cannot hear anything in my headset- Increase the volume in the headset- Ensure that the headset is paired to a device that is playing- Make sure your phone is connected to the headset by tappingthe answer/End buttonI am having pairing problems- You may have deleted your headset pairing connection in yourmobile phone Follow the pairing instructionsI want to reset the headsetIt is possible to reset the headset turn the headset On then’Press and hold’ the volume down and answer/end buttons atthe same time for approx 5 seconds until the battery icon andBluetooth® icon flash 5 times simultaneously - then the pairinglist is reset- turn the headset OFF the next time you power on, the headsetwill go into pairing mode as the first time you powered yournew EaSYGO on