6englishJabra EXTREME – FOR PCPaIrInG your heaDset WIth your Phoneheadsets are connected to phones using a procedure called‘pairing’ by following a few simple steps, a phone can be pairedwith a headset in a matter of minutes1. Put the headset in pairing mode- When you turn on your Jabra EXTREME for the first time, theheadset will automatically start up in pairing mode – i e it isdiscoverable for your phone When the headset is in pairingmode the LED is constantly lit blue2. Set your Bluetooth® phone to ‘discover’ the Jabra EXTREME- Follow your phone’s instruction guide First make sure thatBluetooth® is activated on your mobile phone Then set yourphone to discover the headset This usually involves goingto a ‘setup,’ ‘ connect’ or ‘Bluetooth®’ menu on your phone andselecting the option to ‘discover’ or ‘add’ a Bluetooth® device *3. Your phone will find the Jabra EXTREME- your phone will find the headset under name “Jabra EXTREME”your phone then asks if you want to pair with the headsetaccept by pressing ‘yes’ or ‘Ok’ on the phone and confirm withthe passkey or PIn = 0000 (4 zeros) your phone will confirmwhen pairing is completeEXTREMEEXTREMEEXTREMEIn case of unsuccessful pairing, put the Jabra EXTREME into pairingmode manually Make sure the headset is on Press and hold theanswer/end button for approximately 5 seconds until the LED has aconstant light keep holding down the button until light is constantWearInG styLeThe Jabra EXTREME is ready to be worn with or without the earhook The ear hook can be removed and the headset can be usedwith the ultimate-fit EargelsTMThe ultimate-fit EargelsTM can be used for both left and right wearing* Phone dependent / For use with PC, Jabra PC Suite needs to be installed andrunning on PC