Jabra Elite 85t - Titanium BlackHow do I pair my Jabra Elite 85t with my mobile device?To pair with your smartphone, tablet, or mobile device, follow these steps.1. Turn on the Bluetooth setting on your mobile device.2. Turn on your earbuds by removing them from the charging case.Alternatively, simultaneously press the Left and Right buttons.The LEDs on both earbuds will flash green.3. To enter pairing mode, simultaneously press and hold (3 seconds) theLeft and Right buttons on the earbuds, until the LED on the rightearbud flashes blue.The earbuds are now ready to pair with your mobile device.4. To pair, go to the Bluetooth menu on your mobile device and select theJabra Elite 85t from the list. Alternatively, wear the earbuds to hearthe voice guided instructions.Enter “0000” (four zeros) if you are asked for a pin code.If you pair with two mobile devices, use this process separately for eachmobile device. After pairing with both mobile devices, you will need toreselect the Jabra Elite 85t in the Bluetooth settings on the first mobiledevice. This will complete the pairing process for both mobile devices.In daily use, when you turn on the earbuds, they will automaticallyreconnect with the last previously paired device, if it is turned on andwithin range.09/09/2023 06:13/supportpages/jabra-elite-85t/100-99190000-02/faq/d3b720c8-d5e8-45db-bf58-c24a62e25208 Page 1 of 2