17 englishJabra GO 6470 User manUalNote: If you dock a Jabra GO base and headset that are not paired, the touchscreen asks if you would liketo pair the two units removing the previously paired headset (if any) from the base’s pairing table).4.4 connecting the Jabra go BaSe to youR deSk PhoneIdentifying Your Desk Phone Featuresthe way you connect and configure the Jabra GO base will vary according to the type of desk phone you areusing. Check your phone (by looking at its connectors and/or documentation) to see which of the followingfeatures it has, then see the appropriate section below to learn how to connect your base to the phone:- Standard desk phonethis type of phone does not include any built-in support for adding a headset. you will therefore connectthe Jabra GO base between your desk phone’s handset and body, enabling you to use either the handset orheadset. all desk phones can be connected in this way.- Desk phone with headset portthis type of phone provides a dedicated headset port (usually at the back of the phone). these phonestypically also have a button on the front panel for switching between the headset and handset. this type ofphone might also have an electronic hookswitch (see below).- Desk phone with electronic hookswitchthis type of phone is able to place or answer a call automatically when you press the multifunction button onyour headset. this requires a desk phone that includes an electronic hookswitch feature and also requires anextra adapter cable from Jabra. please see our web site and/or refer to your telephone’s user manual for detailsabout electronic hookswitch compatibility.- Desk phone with GN1000 Remote Handset Liftera handset lifter physically lifts your handset from your desk phone when needed, thereby creating a solutionthat works similarly to an electronic hookswitch. the Gn1000 remote handset lifter is available separately;please speak to your Jabra dealer for details.