Jabra M5390 User Manual

Also see for M5390: Setup guide Datasheet Specifications Datasheet User manual

Contents

Jabra M5390 User Manual Manual pdf 10 page image

7 English4. Setting up your cell phoneSetupPairing your headset with your cell phoneNOTE:Before use, please charge your headset (see 3.4).Before using your Jabra M5390 Multiuse headset with a cell phone, you need to pair it with yourcell phone.• Make sure the headset is off.• During start-up keep pressing the Answer/End button for three seconds. Alternatively removethe snap-on cover and press the reset button on the headset for three seconds. The visualindicator on the headset will turn to steady blue. (see 9.1)• Instruct your phone's Bluetooth ® to ‘discover’ the Jabra M5390 Multiuse headset:o Follow the instructions in your phone’s User Manual. This usually involves going to a ‘setup,’ ‘connect’or ‘Bluetooth’ menu on your phone and selecting the option to ‘discover’ or ‘add’ a Bluetooth® device.o Your phone will find the Jabra M5390 Multiuse headset and ask if you want to pair with it.• Accept pairing by pressing Yes/OK (or similar) on the phone and confirm with the passkey orPIN ‘0000’ (4 zeros).• Your phone will confirm when pairing is complete. If pairing is unsuccessful, repeat the stepsabove. Some cell phones require a manual connection to be established after pairing. Note thaton some cell phones, the headset has to be set as “Trusted device”.NOTE:If you accidentally put the headset into pairing mode, tap the Answer/End button to exitpairing mode.IMPORTANT:The same headset can be paired with multiple cell phones. However, if you havemultiple cell phones paired, switched on and within range of the headset, the headset will not be ableto connect to the base. It is only possible to be connected to one cell phone and the headset base ata time. To be able to connect to the headset base, only have one paired cell phone may be turned onand within range of the headset.