Jabra Netcom GN 9330 Additional Functions

Also see for GN9350 - Headset - Convertible: Use guide Setup and user guide Guide to noise regulations User manual Specifications

Contents

Jabra Netcom GN 9330 Additional Functions Manual pdf 14 page image

• Press the headset’s talk button.• Press the base’s telephone mode button.–> The headset’s link indicator will stop flashing to indicate that the headset-base linkhas been closed.Important: If using electronic hookswitch on your telephone, do not place the headset intothe charging cradle, and do not press the headset´s talk button or press the base´s telephonemode button, as this will disconnect the call.If the headset runs out of battery power, the headset-base link will remain active for up to 2minutes to allow for battery changing.GN 9350 GN 9330 GN 9330 USB4.6 Switching a call from desk telephone handset to headsetIt’s possible to switch a call in progress from the telephone’s handset to the headset:1. Remove the headset from base, or if already out, pressthe headset’s talk button. This establishes a link.–> The headset’s link indicator will start flashing and thecall will be switched to the headset.Note: Do not place handset before the call is over, as this will endthe call.GN 9350 GN 9330 GN 9330 USB4.7 New master headset pairing to baseYou may designate a new master headset for your base.Important: Before designating a new master headset, ensurethat the original headset’s link to the base unit is closed bypressing its talk button. The telephone or USB indicator shouldnot flash.To designate a new master headset:1. Place the new master headset into the charging cradle of the base.2. Press the base’s pairing button.–> Both the telephone and USB mode buttons on the base, and the headset’s link indica-tor, will light for 2 seconds. This indicates successful pairing of the new master headset.'(13