Jabra PRO 920 User Manual

Also see for PRO 920: Installation notes Overview Datasheet User manual Quick start guide

Jabra PRO 920 User Manual Manual pdf 26 page image

27enGLIsh3. Undock the headset and dock in the new base to copy the settings to thenew base. the headset LeD will flash 5 times to indicate the settings arebeing copied, and then will turn solid white when successfully copied to thenew base.4. to copy the settings to multiple bases, repeat step 3.5. When finished copying settings, redock the headset with the original base(primary base), or press and hold the headset mute button until the headsetLeD flashes and then release.7.9 FORCED PAIRING (PAIRING A NEW PRImARY HEADSET)It is possible to force the Jabra PRO 920 to pair with a new headset, even whenit is currently paired with another headset.1. Dock the new headset in the base.2. Press the multi-function for 1-2 seconds. the headset LeD will begin to flash.Forced pairing will take between 10 seconds - 2 minutes.3. When paired successfully, the battery indicator will turn green (or red if theheadset battery is low).7.10 UPDATE FIRmWARE AND HEADSET SETTINGS (SERVICE CABLE)It is possible to update the Jabra PRO 920 firmware and headset settings (viaJabra Control Center) by connecting the Jabra PRO 920 to a PC using theservice cable (optional accessory).1. Disconnect the Jabra PRO 920 from power.2. Connect the Jabra PRO 920 to any available Usb port on the PC using theservice cable (optional accessory).3. Connect the Jabra PRO 920 to power, and wait for the headset indicator toturn green.When connected successfully the Jabra 920 base is put into firmware updatemode. It is now possible to update firmware and configure headset settingsusing Jabra Control Center (a component of Jabra PC suite). Jabra PC suite canbe downloaded from www.jabra.com/setup.nOtE: to exit firmware update mode, disconnect the service cable and unplugthe Jabra PRO 920 from power to reboot.