Jabra PRO 9450 User Manual

Also see for PRO 9450: Quick start guide Datasheet Quick start guide Quick start guide Datasheet

Jabra PRO 9450 User Manual Manual pdf 16 page image

17ENGLISHJABRA PRO™ 9450, JABRA PRO™ 9450 FLEX andJABRA PRO™ 9450 DUO3.2 CONFIgURINg FOR SOFTPHONES1. Download and Install Jabra PC Suite from jabra.com/setup. Refer to the Jabra PC Suite section of this manualfor further information.2. Open softphone software (e.g. Microsoft Lync) and set the Jabra PRO 9450 as speaker and microphone in theaudio configuration. Refer to specific softphone documentation for assistance in setting audio configurations.For the latest list of supported softphones, please visit the Jabra website at www.jabra.com/setup.3.3 LIMITED CONFIgURATION USINg THE BASEIt is highly recommended to use the Jabra Control Center for all configuration changes. However, there are sixsettings that can be configured using the base.• Remote call control mode.• IntelliTone level.• Maximum DECT wireless range.• Desk phone audio.• Softphone audio.• Softphone type.Change settings using the base1. Ensure there are no active calls.2. Remove the front panel of the Jabra PRO 9450 base.3. Center-press the microphone volume switch on the base to enter setup mode. The mute indicator will blinkslowly to indicate setup mode.4. Tap the desk phone button on the keypad to cycle through the settings. The first setting is Remote call controlmode. The current setting is indicated by the desk phone icon.5. Tap the softphone button on the keypad to cycle through the values for each setting. The current value isindicated by the softphone icon.6. When finished, center-press the microphone volume switch to save settings and exit setup mode. The basewill restart.