Jabra Pro 9450 Mono FlexHow to connect my Jabra PRO 9450 with Alcatel IP Touch4028 EE, 4038 EE, 4068 EEPrerequisite:Jabra PRO 9450 + Jabra LINK 14201-20In combination with one of the following phones:IP Touch 4028 EEIP Touch 4038 EEIP Touch 4068 EEEE = Extended EditionConnection:1. Insert the RJ9 to RJ9 connection cable supplied with the Jabra PRO94x0 into the socket marked with the "phone" on your Jabra PRO 94x0base and the other end into the socket marked with a "phone" on theEHS adapter2. Now connect the end of the RJ45 to RJ45 connection cable (EHSadapter) marked in "red" to the socket marked "AUX" on the EHSadapter to the "AUX" socket on your Jabra PRO 94x0 base.3. With the cable marked white D, connect the Headset / Handset socketon your Jabra LINK EHS Adapter to the 3.5 mm headset socket on theside of your desk phone.4. Now connect the RJ12 to RJ12 connection cable marked orange and"A" to the socket of the EHS adapter identified with "COM" as well aswith the "bell" socket on your phone.Please be aware that the phone will not be fully functional until the24/11/2022 16:30https://www.apac.jabra.com/supportpages/jabra-pro-9450/9450-25-707-103/faq/8df8fc6e-dbbb-43d7-ae3d-d33e7ff4bbf7Page 1 of 4