Jabra Pro 9450 Mono Manual
Also see for Pro 9450 Mono: ManualQuick start guideInstruction manualQuick start guideHow do
  |
Jabra Pro 9450 MonoHow do I connect my Jabra wireless headset with the JabraLink 14201-30 to my desk phone so I have remote call controlusing my headset?Connection:1. Connect the AC adapter that is supplied with the headset to theheadset base. Connect the other end to an electrical outlet.2. Connect the Jabra Link 14201-30 EHS cable with the red band to theAUX interface on the headset base. Connect the end with the blueband to the headset base socket that is marked with a phone icon.3. Connect the single end of the Jabra Link 14201-30 EHS cable to theUSB interface on the desk phone.Configuration:1. Ensure the USB headset function on the desk phone is enabled. Referto your phone or IT support for assistance.2. Follow the setup instructions for your Jabra wireless headset. If theheadset base requires manual configuration, set the Electronic HookSwitch setting to “DHSG” and set the dial tone switch to position“A”.3. Make a call to the headset. If the volume of your voice is too loud orquiet to the person you are calling, adjust the headset microphonevolume until you achieve the optimum level.17/01/2024 23:44https://www.jabraheadsets.ch/supportpages/jabra-pro-9450/9450-25-507-101/faq/f7b1f50e-e8d0-422e-92bc-fc10f3af6d57 Seite 1 von 2 |
Related manuals for Jabra Pro 9450 Mono
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine