6englishJabra SP200PAIRING YOUR JABRA SP200 WITHYOUR MOBILE PHONEthe Speakerphone can be connected to a mobile phone using aprocedure called ‘pairing’ by following a few simple steps, a phonecan be paired with the speakerphone in a matter of minutes1 Put the speakerphone in pairing mode- When you turn on your Jabra SP200 for the first time, thespeakerphone will automatically start up in pairing mode – i eit can be detected by your phone When the speakerphone is inpairing mode the blue LeD will flash rapidly2 Set your Bluetooth phone to ‘search’ for the Jabra SP200- Follow your phone’s instruction guide First make sure thatbluetooth is activated on your mobile phone then set yourphone to search for devices this usually involves going to a‘setup,’ ‘connect’ or ‘bluetooth’ menu on your phone and select-ing the option to ‘search’ or ‘add’ a bluetooth device *3 Your phone will find the Jabra SP200- Your phone will find the speakerphone under the name “JabraSP200” Your phone then asks if you want to pair with theJabra SP200 accept by pressing ‘Yes’ or ‘oK’ on the phone andconfirm with the passkey or PIn = 0000 (4 zeros) Your phonewill confirm when pairing is completeCONNECTIVITYSELECTMobilSurfBLUETOOTHInfrared portWap optionsSynchronizationNetworksDEVICES FOUNDJabra SP200Jabra SP200OKPasskey:****HANDSFREESELECTJabra SP200added.The handsfree isnow ready for useSELECTManual pairing modeIf you wish to use the speakerphone with a different phone, orif the pairing process was interrupted, you can manually set thespeakerphone to pairing modeturn the speakerphone on Press and hold the answer/end buttonfor approximately 5 seconds until the blue LeD light stars blinkingrapidly then repeat steps 2 and 3 in the above pairing guide* Phone dependent
