6Microphone PositioningTo take advantage of the noise canceling qualities of the microphone, positionthe Stratus Ultra-G headset with the flat side of the microphone, marked withan F, facing you. The microphone boom should be adjusted so that themicrophone is approximately one finger width away from your lower lip(see Figure 11).The Stratus Ultra-G has a flexible boom that can be reshaped until themicrophone is correctly positioned in front of your mouth. One hand shouldgrasp and steady the receiver end of the boom. The other hand can then flexthe boom (see Figure 12).CAUTION: Never forcefully rotate the microphone boom past its stop point inthe receiver assembly!Clothing ClipThe clothing clip should be fastened for comfortable wearing (see Figure 13).It is designed to prevent the weight of the cord from dislodging the headset.Position the clip conveniently on your clothing. To reduce excess slack,reposition the clip by sliding it up and down the cord.Figure 12Figure 11Microphone Positioning1 FingerWidthFigure 13Clothing Clip