Jabra T5330 - Headset - Over-the-ear User Manual

Also see for T5330: Features User guide Faq User manual

Contents

Jabra T5330 - Headset - Over-the-ear User Manual Manual pdf 5 page image

4English5 EnglishIf your telephone has aheadset port, go directly to3.2b.3.1 Unplug handset cord fromyour telephone and connect tothe port on base unit markedwith .3.2a Connect enclosed telephonecord to the now empty handsetport on telephone, and to theport on base unit marked with.3.2b (Headset port use only)Connect enclosed telephone cordto the headset port on telephone,and to the port on base unitmarked with .3.3 Connect AC power adapterto port on bottom of base unit,then connect to AC power outlet.Visual indicator on base will lightgreen.3. Setting up your desk phone3.13.33.2Note: AUX port is used for Remote Handset Lifter (RHL). Please refer to Appendix.3.4 Place headset in chargecradle and charge a minimum of30 min. before use. A full chargetakes about 2 hours. Visualindicator on headset will flashgreen while headset is charging,and light steady green when fullycharged.3.5 Turn on headset by pressinganswer/end button for 2 sec.(visual indicator will flash twicewith green light and will beepthree times), or by placingheadset in charge cradle. Turn offheadset by pressing answer/endbutton for 2 sec. (visual indicatorwill flash twice with green lightand will beep three times).3.43.53.83.6 Clear dial tone3.6 Take headset out of chargecradle and put it on.3.7 Lift handset from telephone,tap the Answer/End button onthe headset to establish an audioconnection and listen for a dialtone in headset.3.8 If dial tone is missing orunclear, slowly slide the clear dialtone switch on bottom of baseunit through the 3 settings.3.9 Set switch to the positionthat gives the clearest dial tone.2 sec3.73.9