5englishJabra WaVETURNING YOUR HEADSET ON AND OFF- slide the on/off button towards the symbol “I” to turn theheadset on When you do so both indicators will flash on theJabra statusDisplay™- slide the on/off button towards the symbol “o” to turn theheadset offPAIRING IT WITH YOUR PHONEHeadsets are connected to phones using a procedure called‘pairing’ by following a few simple steps, a phone can be pairedwith a headset in a matter of minutes1 Put the headset in pairing mode- When you turn on your Jabra WaVE for the first time, the headsetwill automatically start up in pairing mode – i e it is discoverablefor your phone When the headset is in pairing mode the Bluetooth®status indication on the statusDisplay™ is flashing2 Set your Bluetooth® phone to ‘discover’ the WAVE- Follow your phone’s instruction guide First make sure thatBluetooth® is activated on your mobile phone then set yourphone to discover new devices this usually involves goingto a ‘setup,’ ‘connect’ or ‘bluetooth’ menu on your phone andselecting the option to ‘discover’ or ‘add’ a Bluetooth® device *3 Your phone will find the Jabra WAVE- Your phone will find the headset under name “Jabra WaVE”Your phone then asks if you want to pair with the headsetaccept by pressing ‘Yes’ or ‘oK’ on the phone You may beasked to confirm with a passkey or PIn then use 0000 (4zeros) Your phone will confirm when pairing is complete andthe Bluetooth® status indication on the statusDisplay™ willshift from flashing light to steady light and the headset voiceguidance will say “connected”* Phone dependent
