Jabra Wave User Manual

Also see for WAVE: Selling guide Technical specifications Quick start guide User manual Declaration of conformity

Contents

Jabra Wave User Manual Manual pdf 11 page image

9englishJabra WaVEonce you have “paired” your headset with two phones simplymake sure your headset is on, and that Bluetooth® is enabledon the phones and the headset will then automatically connect toboth phonesPlease note:- Last number redial will dial the number from the phone whereyou last made an outgoing call, so not necessarily from the phoneyou last used- the Voice Dialling function will only work on the last pairedmobile phone In other words you should make sure to pairyour primary phone lastTROUBLESHOOTING & FAQI hear crackling noises- Bluetooth® is a radio technology, which means it is sensitive toobjects between the headset and the connected device It isdesigned for the headset and the connected device to be usedwithin 10 meters (33 feet) of each other, with no major objectsin the way (walls, etc )I cannot hear anything in my headset- Increase the volume in the headset- Ensure that the headset is paired to a device that is playing- Make sure your phone is connected to the headset by tappingthe answer/End buttonI am having pairing problems- You may have deleted your headset pairing connection in yourmobile phone Follow the pairing instructionsI want to reset the headsetIt is possible to reset the headset turn the headset on then ’Pressand hold’ the volume down and answer/end buttons at the sametime for approx 5 seconds until the battery icon and Bluetooth®icon flash 5 times simultaneously - then the pairing list is reset- turn the headset oFF the next time you power on, the headsetwill go into pairing mode as the first time you powered yournew Jabra WaVE on