Jack LaLanne's POWER JUICER E-1188-1 Operating Manual
                        | |
19TROUBLESHOOTING• Check if unit is plugged in.• Check if Locking Bar is locked in place properly.• Check if all parts are assembled properly.• Check if there is any residue left between Bladeand Receptacle.• Check if all parts are assembled properlyand in the correct position.• Juicing overripe fruit may result in too muchpulp and will clog the Filter. Turn machine offand clean the Filter.• Too much pressure may have been appliedwith the Pusher while processing causing themotor to accidentally overheat. Power down,disassemble, clean and allow to cool; see page 4.• Juicing overripe fruit may result in too muchpulp and will clog the Filter. Turn machine offand clean the Filter.• Make sure the Juice Spout is in the downwardposition while juicing. If it is in the upwardposition the juice will not come out.It will overflow from the sides of the Receptacle.• Lubricant burn-off may occur during first usebut should go away thereafter.• Too much pressure may have been appliedwith the Pusher while processing causing themotor to accidentally overheat. Power down,disassemble, clean and allow to cool; see page 4.• Make sure the Juice Spout is in the downwardposition while juicing.• Push gently with the Pusher. Pushing too hardmay cause the juice to come out of the side ofthe Receptacle.The motor does notrun after beingswitched on.The motor is runningwith a loud noise andexcessive vibration.The motor overheatscausing the powerto automaticallyshut off.Juice is comingout of the side ofthe receptacle.No juice is comingout of the Spout.Juicer is Burning orSmoking.Problem Possible Reasons and Solution |
Related manuals for Jack LaLanne's POWER JUICER E-1188-1
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine