1711. Storage1. Charging to maximum capacityFully charge the power supply unit prior to long-term storage. Charge the power supply unit at least once everythree months.2. Turn off all switchesAs soon as the Explorer 440 power supply unit is charged fully, switch off the main switch and the otherON/OFF buttons and disconnect the adaptor from the main unit.3. CleaningWipe away any dirt using a damp cloth.ATTENTIONGasoline, thinner, kerosene, petroleum, etc. have the characteristics of solvents.Do not use.4. StorageStore the power supply unit only in a dry and dust-free environment which is out of reach of children. Suitablestorage temperature: 0 to 40°C (32 - 104 °F). Keep out of direct sunlight. Make sure that the unit rests on astable surface.12. Service life of lithium ion batteriesCharge, supply current and store between 0 and 40°C (32 - 104 °F).Using the battery at temperatures outside the lower and upper limits reduces the battery‘s running time.Do not connect a continuous load of more than 300 W.The unit‘s output stops automatically in case of overloading, since it reduces the running time of the battery.Do not continue to charge the battery after it has charged completely.Pay attention to the indicated capacity. Do not charge the battery once it has been fully charged or the chargingprocess has been concluded. Otherwise the service life of the lithium battery may be reduced.Switch off the unit if it is not being used.Unnecessary power consumption also reduces the running time of the lithium battery.Fully charge the battery prior to placing it in storage.Fully charge the power supply unit prior to lengthy periods of non-use for storage and recharge the unit. Afterprolonged storage, it may be necessary to charge and discharge the battery several times in order to reach fullcapacity.Instruction Manual / Jackery Explorer 440