Jacuzzi 3636S Installation And Operation Instructions Manual

Also see for 3636S: Installation instructions

Contents

Page 6 www.jacuzzi.com Shower Base Installation And OperationEnglishInstallation ProceduresThe weep holes are necessary to allow drainagefrom leakage through an unsealed tiled grout.Filling the area marked, Do Not Fill, will prevent moisturefrom draining back to the base through the weep holes, seeFigure 8. Such moisture is due to leakage through the tilegrout. Sealing the tile grout will prevent this leakage.CAUTIONShim (Ifnecessary)Silicone sealantCement boardBlockingTileSTUDGroutDO NOT FILLFigure 89Clean Up After Installation• The acrylic finish will give long-lasting beauty when properly maintained. To avoid dulling and scratching of the finish, neveruse abrasive cleaners or harsh chemicals. A mild liquid detergent and warm water will clean soiled surfaces.• Remove spilled plaster with a wood or plastic edge. Metal tools will scratch the surface. Spots left by plaster or grout can beremoved if lightly rubbed with a mild detergent and a damp cloth or sponge.• Minor scratches that do not penetrate the color finish can be removed by lightly sanding the surface with a 600-grit,wet-dry sandpaper. To restore the glossy finish, use a special compound like Meguiar’s No. 10 Mirror Glaze. If it is notavailable, use an automotive rubbing compound followed by an application of automotive paste wax.• Major scratches and gouges that penetrate the acrylic surface may require refinishing. Ask your Jacuzzi® Luxury Bathdealer for special instructions.Rough-In Dimension Chart (Neo-Angle Only)*C represents the dimension from the stud wall to the faceof the finishing materials used in the shower construction.If Jacuzzi® Luxury Bath surround walls are used, subtract1-3/8" from dimension A to arrive at glass enclosuredimensions. If other materials are used, subtract theirthickness from dimension A.FOR SQUARE & RECTANGULAR SHOWER BASES: IfJacuzzi® Luxury Bath surround walls are used, subtract1-3/8" from stud wall of each end to arrive at glass enclosuredimensions (see front page illustration and chart). If othermaterials are used, subtract their thickness from stud wall ofeach end.Model A B C3838N 16-3/4" 28" 1-3/8"4242N 20-3/4" 27-3/8" 1-3/8"4848N 26-3/4" 27-1/2" 1-3/8"*C*CABAof ThresholdSpecifications Subject To Change Without NoticeJacuzzi® Luxury Bath has obtained applicable code (standards) listings generally available on a national basis for products of thistype. It is the responsibility of the installer/owner to determine specific local code compliance prior to installation of the product.Jacuzzi® Luxury Bath makes no representation or warranty regarding, and will not be responsible for any code compliance.Determine Glass Enclosure Dimensions