Amiga™ Pure Air II™ BathModel: BE30Installation NotesRefer to installation instructions included with fixture before beginning installation.Please confirm product availability and specifications before commencing with anyinstallation work.PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGEWITHOUT NOTICE.Ordering InformationProduct Code:BE30 Amiga™ Pure Air® II BathLeft Hand• Accessories / Hardware:Trim Kit Rotary: #BN21• Trim Kit Finishes Available:(827) – Chrome(898) – Brushed Chrome(815) – Satin Nickel(829) – Bright Brass(805) – Platinum(826) – Brushed Nickel(845) – Oil Rubbed BronzeTechnical SpecificationsDimensions72” L x 36” W x 20-3/4” H(1829 mm) L x (914 mm) W x (527 mm) HDrain/OverflowA: 16-7/8” (429 mm) B: 14” (356 mm)Cutout70” x 34”Total Weight791 lb (359 kg) / 44 lb/sq. ft. (215 kg/m2)Operating Gallonage53 U.S. Gal. (201 Liters)Product Weight100 lb (45 kg)Skirt MountingOptional U-FrameElectrical SpecificationsRequires a dedicated GFCI protected separate circuit.Blower: 120 VAC, 15 AMP, 60 Hz.HeaterNo water heater is available on this unit. Blower has integral air heater.72''18''36''2''16'' x 4''*14''Blower12" H x 18" LService AccessOptionalService Access© Jacuzzi Whirlpool Bath • 14801 Quorum Drive • Dallas • Texas • 75254 • www.jacuzzi.comEND VIEWHWSIDE VIEWL2"(51 mm) (Blower)#FR03 12/06DRAIN/OVERFLOWABProduct Shown: Amiga™ Pure Air® II Bath Left Hand Shown Model: BE30* Measurements inside unit represent cutout in floor to allow for drain/overflow.Minimum Service Access dimensions given.