Capella® 60 Corner Pure Air® II Bath w/Integral SkirtModel: EA20Installation NotesRefer to installation instructions included with fixture before beginning installation.Please confirm product availability and specifications before commencing with anyinstallation work.PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGEWITHOUT NOTICE.Ordering InformationProduct Code:EA20 Capella® 60 Corner Pure Air®II Bath w/ Integral Skirt Right-Hand• Center Drain Location• Accessories / Hardware:Trip-Lever Drain Kit: #X559Rotary Drain Kit, 26” Cable: #8730• Trim Kit Finishes Available:(827) – Chrome(898) – Brushed Chrome(815) – Satin Nickel(829) – Bright Brass(805) – Platinum(826) – Brushed Nickel(845) – Oil Rubbed BronzeTechnical SpecificationsDimensions60” L x 60” L x 20-1/2” H(1524 mm) L x (1524 mm) L x (521 mm) HDrain/OverflowA: 18” (457 mm) B: 12-1/8” (308 mm)CutoutNATotal Weight1217 lb (552 kg) / 56.8 lb/ft2 (277 kg/m2)Operating Gallonage73 U.S. Gal. (276 Liters),Min. 55 U.S. Gal. (208 Liters)Max. 90 U.S. Gal. (341 Liters)Product Weight170 lb (77 kg)Skirt MountingIntegralElectrical SpecificationsRequires a dedicated GFCI protected separate circuit.Blower: 120 VAC, 15 AMP, 60 Hz.HeaterNo water heater is available on this unit. Blower has integral air heater.27"46-5/8"27"60"43-1/8"6"60"34-15/16"14" X 4"*33-1/2"- Junction BoxBlower90˚ 90˚90˚12" H x 18" LService Access© Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino • CA • 91710 • www.jacuzzi.com1"(25 mm)20-1/2"FRONT VIEW SIDE VIEW# FQ89 06/07Product Shown: Capella® 60 Corner Pure Air II Bath with Integral Skirt Model: EA20* Measurements inside unit represent cutout in floor to allow for drain/overflow.Minimum Service Access dimensions given.DRAIN/OVERFLOWAB