Jacuzzi J-375 Owner's Manual

Also see for J - 355: Manual Instructions for preinstallation Instructions for preinstallation Owner's manual Owner's manual

Contents

Jacuzzi J-375 Owner's Manual Manual pdf 41 page image

35J-30011.4 Programming the Change Filter TimerA programmable filter timer can be set to remind you when to clean orreplace the filters.• The default setting is for 180 days.• The timer range is from OFF to 180 days, in increments of 10 days.Note: It is not recommended that this feature be turned OFF. In order tocontinually maintain clean and working filters, it should be program asinstructed.A. Programming or resetting the timer.Note: If no button is pressed within 5 seconds of each selec-tion the screen will revert back to the Main Menu and the cur-rent settings will remain active.1. Press until you get to the “FC” Menu. The display will scroll“FILTER CHANGE.” After the second scroll, if no action is taken, thesystem will revert back to the Main Menu.2. Press or to prepare the system for changes. Continually pressto adjust the length of time for the timer.3. Once you select the number of days, press 1 to confirm thisselection. The system will return to the “FILTER CHANGE” Menu.4. Once the timer expires the display will alternate between the watertemperature and “CHANGE FILTER”, page 52.11.5 Programming the CLEARRAY TimerA programmable change bulb timer can be set to remind you when towhen it is time to replace the UV bulb for the CLEARRAY system.• The default setting is for 365 days.• The timer range is from OFF to 365 days, in increments of 10 days.Note: It is not recommended that this feature be turned OFF. In order tocontinually have the CLEARRAY system effectively preform its function,it should be program as instructed.A. Programming or resetting the timer.Note: If no button is pressed within 5 seconds of each selec-tion the screen will revert back to the Main Menu and the cur-rent settings will remain active.1. Press until you get to the “UV” Menu. The display will scroll“CLEARRAY BULB.” After the second scroll, if no action is taken,the system will revert back to the Main Menu.2. Press or to prepare the system for changes. Continually pressto adjust the length of time for the timer.3. Once you select the number of days, press 1 to confirm thisselection. The system will return to the “CLEARRAY BULB” Menu.4. Once the timer expires the display will alternate between the watertemperature and “CHANGE CLEARRAY BULB” page 52.