Jacuzzi J-DREAM II Owner's Manual

Also see for J-DREAM II: Owner's manual Manual

Contents

Jacuzzi J-DREAM II Owner's Manual Manual pdf 32 page image

Printed in the U.S.A.Printed on Recycled PaperPRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.USE INSTALLATION INSTRUCTIONS SUPPLIED WITH PRODUCT.©1997 Jacuzzi Whirlpool Bath K922000 8/13/04Jacuzzi Whirlpool BathP.O. Box 702168, Dallas, TX 75370-2168Service Support: Call (800) 288-4002Jacuzzi Whirlpool Bath has obtained applicable code (standards) listings generally available on a national basis for products of this type.It is the responsibility of the installer/owner to determine specific local code compliance prior to installation of this product. Jacuzzi WhirlpoolBath makes no representation or warranty regarding, and will not be responsible for any code compliance.Troubleshooting Chart1. Control is on and appears tobe functioning, but no steam.A. Allow 2 minutes for steam toflow.B. Replace water filter, drain andflush out steamer and steamplumbing. Pour six ounces ofwater into the steam deliverytube. Reset high limit safetyswitch.A. Replace water filter, drain andflush out steamer and steamplumbing. Pour six ounces ofwater into the steam deliverytube. Reset high limit safetyswitch.A. Replace water filter, drain andflush out steamer and steamplumbing. Pour six ounces ofwater into the steam deliverytube.2. Steam generator will filland produce steam, but willboil water away withoutrefilling and shut itself off.3. Excess water is exhaustedfrom the steam head.A. Steamer heating up.B. High limit safety switch tripped.A. There is a high concentration ofmineral buildup in the tankwater because of continued usewithout draining the tank. Thiscauses faulty water fill opera-tion, and the high temperaturesafety switch will trip.A. There is a high concentration ofmineral buildup in the tank.PROBABLE CAUSEPROBLEM REMEDY30