Jacuzzi J-SHOWER TOWERTM Installation And Operating Manual

Contents

Jacuzzi J-SHOWER TOWERTM Installation And Operating Manual Manual pdf 3 page image

1ImportantThe bathtub must be installed per installation instructions D884000 for the Merano™ or E160000 for the Siena™.Follow the instructions to ensure that proper framing has been provided to support the J-Shower Tower. Finishingmaterials must be waterproof and sealed so that spray and condensation do not cause moisture damage.NOTE: The J-Shower Tower has been partially pre-assembled for your convenience during installation.The installer must still follow the instructions to ensure proper installation of the tower and components(see page 13). We recommend that two persons perform this installation.ContentsExploded View of J-Shower Tower ________________________________________________________ 2Shower Tower Hardware Identification Chart __________________________________________________ 4Tower Assembly _______________________________________________________________________ 7Water Lines to Mixer/Diverter Valve _________________________________________________________ 10Attaching Diverter Valve to Shower Wall _____________________________________________________ 10Tower Installation ______________________________________________________________________ 12Tower Disassembly ______________________________________________________________________ 13Placing Tower __________________________________________________________________________ 14Fixed Panel Assembly ____________________________________________________________________ 15Mounting Top Ring and Wall Bracket to Tower _________________________________________________ 17Fixed Glass Frame Attachment _____________________________________________________________ 19Sealing and Trimming ____________________________________________________________________ 20Attaching Face Plate _____________________________________________________________________ 21Handle Installation _______________________________________________________________________ 21Handle Operation _______________________________________________________________________ 22Tools Required1. Drill.2. Drill bits: 3/32", 1/8", 3/16" and 5/16".3. Flat blade screw driver, No. 1.4. Phillips type blade screw driver, No. 2.5. 5/16" or 8 mm deep socket or nut driver.6. Caulking gun.7. Sealant (100% silicone).8. Adjustable wrenches (small and medium).9. Allen wrenches: 1.5 mm, 2.5 mm, 3 mm and 5/64".10. Step ladder.