Jacuzzi K272000AF Installation And Operating Instructions Manual

Also see for AMIGA: Installation and operation instructions Installation & operating instructions

Jacuzzi K272000AF Installation And Operating Instructions Manual Manual pdf 10 page image

ENGLISHROUGHING-IN REFERENCE (RECTANGULAR)AMIGA™, Left Hand*72''18''36''2''16'' x 4''14''12" H x 18" LService Access11-1/8''MotorOpt. Service Access10Jacuzzi Whirlpool Bath K272000AF 7/06*72''18''36''2''16'' x 4''14''Motor12" H x 18" LService AccessOpt. Service Access 11-1/8''AMIGA™, Right Hand 14-1/2"AMIGA™ WITH INTEGRAL SKIRT,Left Hand*72''36''2''16'' x 4''11-1/8''Motor17-3/8"*72''36''2''16'' x 4''14-1/2''Motor11-1/8''AMIGA™ WITH INTEGRAL SKIRT,Right Hand17-3/8''BIANCA™*72"24"48"8-1/2"13-3/4"13-1/2" x 4"(Left-hand only as shown)2"Motor12" H x 18" LService AccessOpt. Service Access*60"32"CETRA™ W/INTEGRAL SKIRT, Left Hand15-5/8"2"10" x 4"9-3/8"5-11/16"MotorCETRA™ W/INTEGRAL SKIRT, Right Hand*60"32"15-5/8"2"10" x 4"9-3/8"5-11/16"Motor9" CETRA™ 532, Left Hand*60"32"16"12" x 4"Motor2"5-3/4"12" H x 18" LService AccessOpt. Service Access9"CETRA™ 532, Right Hand12" x 4"Motor2" 5-3/4"12" H x 18" LService AccessOpt. Service Access*60"32"16"9"CETRA™ 536, Left Hand*60"36"18"12" x 4"Motor12" H x 18" LService AccessOpt. Service Access2"5-3/4"9"CETRA™ 536, Right Hand12" x 4"Motor12" H x 18" LService AccessOpt. Service Access 2" 5-3/4"*60"36"18"9"CETRA™ 536 WITH INTEGRAL SKIRT, Left Hand*60"36"17-3/8" 12" x 4"2"5-3/4"Motor9"CETRA™ 536 WITH INTEGRAL SKIRT, Right Hand12" x 4"2" 5-3/4"Motor*60"36"17-3/8"2-1/2"*60"16"32"12" x 5"8-1/4"LUXURA™ 5, Left HandMotor12" H x 18" LService AccessOpt. Service Access2-1/2"5-1/4"LUXURA™ 5, Right Hand2-1/2"15" x 5"8-1/4"Motor12" H x 18" LService AccessOpt. Service Access 2-1/2" 5-1/4"*60"16"32"ROUGHING-IN*Add 1/4" (6,4 mm) to this dimension when roughing-in for 3-wall niche.NOTE: 1. The overall dimensions are nominal with a tolerance of +0 and -1/4" (6,4 mm).2. Service Access dimensions given are minimum. Service access is still required for units that do not have pre-installed Pump/Motor.3. Measurements inside each unit represent cutout in floor to allow for drain/overflow.4. All measurements are in inches. To convert to millimeters, multiply inches by 25.4.5. Not all export units come with pre-installed Pump/Motor.