Jacuzzi Luxury/Designer Bath Series K339000X Installation & Operation Instructions

Also see for CIPREA: Installation & operation instructions Instructions for preinstallation

Contents

Jacuzzi Luxury/Designer Bath Series K339000X Installation & Operation Instructions Manual pdf 15 page image

ENGLISH15Jacuzzi Whirlpool Bath K339000X 3/06INSTALLATION INSTRUCTIONSService AccessFor partially or fully sunken installations, allow for ac-cess to service connections. It is the installer's respon-sibility to provide sufficient service access. The recom-mended minimum dimensions allowable for service tothe bath are shown in the "Service Access" illustration.Provide adequate area around unit for air circulationfor cooling the motor and to supply sufficient air to thejets. Do not insulate this area or around motor.MOTOR18" PREFERREDACCESSALTERNATEACCESS18"SERVICE ACCESS (WITHOUT SKIRT)12"12"20"36"24"18"BACSERVICE ACCESS (CORNER BATHS)A - Preferred accessB - Acceptable alternative if access A is not possibleC - Additional access for equipment (Optional)RIGHT HAND UNIT SHOWNPUMP/MOTOR18"ALLUSION SERVICE ACCESS12"18"12"HEATERALTERNATEACCESSPREFERREDACCESSFRONTThe Allusion Whirlpool baths should access as shownbelow.The Duetta Whirlpool baths should access as shownbelow.MOTOR18" ALTERNATEACCESSPREFERREDACCESS18"DUETTA SERVICE ACCESS (WITHOUT SKIRT)12"12"FRONTHEATERService Access (Corner Tubs)For partially or fully sunken installations, allow for ac-cess to service connections. It is the installer's respon-sibility to provide sufficient service access. The recom-mended minimum dimensions allowable for service tothe bath are shown in the "Service Access" illustration.Provide adequate area around unit for air circulationfor cooling the motor and to supply sufficient air to thejets. Do not insulate this area or around motor.In some cases, access may not have been providedbecause of the design of the bath environment and hav-ing full understanding that in this case, it may be neces-sary to remove the unit for service.If this is the case, diagnosing a problem may not bepossible without complete access to the plumbing sys-tem. This would necessitate the removal of the unit.Although this practice is not commonly implemented, itis an acceptable method.In some cases access may have been provided inArea A but service is required in Area B which requiresthe unit to be pulled for service and reinstalled.If service access has not been provided, it is thehome owners responsibility to remove the bath andprovide the required access, should a repair becomenecessary.MOTORAREAAAREABSERVICE ACCESS