Jacuzzi SWIMSPA Series Owner's Manual

Also see for J3000 16: Owner's manual

Jacuzzi SWIMSPA Series Owner's Manual Manual pdf 26 page image

26Press Up or Down to display the Set Temperature (indicated by a flashing oFor o C, plus a change in colour of the temperature). Press up or Down again tomodify the Set Temperature. The Set Temperature changes immediately.If you need to switch between High Temperature Range and Low Tempera-ture Range you need to go to the Settings Screen.10.2 Navigation• Navigating the entire menu structure is done by touching the screen.• The two screen selections indicated below can be selected. Touch one of these toenter a different screen with additional controls.• Most menu screens time out and revert to the main screen after 30 seconds of noactivity.• At the bottom of the screen, at certain times an indicator may appear showing that amessage is waiting. Touch this indicator to go to the Message Display Screen. On thatscreen some of the messages can be dismissed.NAVIGATIONSettings Spa EquipmentMESSAGESA warning message is waiting10.3 The Spa ScreenThe Spa Screen shows all available equipment to control. The display shows icons that are re-lated to the equipment installed on a particular swim spa model, so this screen may changedepending on the installation. The icon buttons are used to select and control individualdevices.Some devices, like pumps, may have more than one ON state, so the icon will change to re-flect the state of the equipment. Below are some examples of 2-speed pump indicators.Jets Off Jets Low Jets High