4812 Turning on power• (fig. 1) Press and release the indicated key within 2 sec-onds. The white light will come on. You can now choose from5 other steady lights, or from one of the four available coloursequences (cycles). Selection of steady colours• Press and release again, within 2 seconds, the key shownin fig. 1: light will change from white to sky blue.• To move on to the next colour, press the same key again. Thesequence of steady colours includes the following:- white- sky blue- orange- yellow- green- magenta (purplish red)• After the last colour, the sequence starts again from white,and so on. Selecting a cycle of colours• (fig. 2) To activate a colour cycle, press and release within2 seconds the corresponding key.• To change from one cycle to another, press and release thekey for the required cycle within 2 seconds. Shutdown• (fig. 1) Hold the indicated key down for at least 2 seconds.• The “Cromodream ® ” function can be used with any show-er enclosure function.• While a cycle is running, if you press the key in fig. 1, thecycle is interrupted and the light takes on a steady colour.• During a colour cycle, if you hold down a key for a coloursequence for at least 2 seconds, the cycle is interrupted andthe light takes on the steady colour that was active beforethe cycle started.• Each colour cycle lasts about 12 minutes. After that, thelight takes on the steady colour that was active prior to theselected colour cycle. In any case, after one hour with noactivation of any key shown in figs. 1 an 2, the light goes offby itself.NOTE

Jacuzzi flexa DOUBLE Use & Maintenance