Janome 2160DC Service Manual
                                             | |
Contents
| 
14The highest position of the feed dog should be between 0.80 and 0.90 mm from the surface of the needle plate.1. Lower the presser foot and turn the power switch on.2. Turn the handwheel toward you to set the feed dog at the highest position.3. Remove the free-arm cover.4. Loosen the setscrew (A) q and nut w.5. Adjust the feed dog height by turning the adjusting screw e. The highest position of the feed dog should bebetween 0.80 and 0.90 from the surface of the needle plate.6. Tighten the nut w and setscrew (A) q.7. Attach the free-arm cover.Feed dog heightMechanical AdjustmentA BewqqPresser footFeed dog0.80 – 0.90mmSurface of the needle plate |
Related manuals for Janome 2160DC
manualsdatabase
Your AI-powered manual search engine