Janome dc2015 Instruction Book

Contents

Janome dc2015 Instruction Book Manual pdf 42 page image

38q ew Corded Buttonholeq Stitch pattern: 16w Needle thread tension: 1 to 5e Presser foot: Automatic buttonhole foot Rz Use the same procedure as the square buttonholeprocedure. Set the stitch width to match the thicknessof the cord used. With the buttonhole foot raised,hook the filler cord on the spur q at the back of thebuttonhole foot.Bring the ends toward you under the buttonhole foot,clearing the front end. Hook the filler cord into theforks w on the front of the automatic buttonhole footto hold them tight.Lower the needle into the garment where thebuttonhole will start, and lower the foot.q Spurw Forkszxcqwx Start the machine and sew the buttonhole. Each sideof the buttonhole and the bartacks will be sewn overthe cord.Remove the fabric from the machine, and cut thesewing threads only.e Needle thread (top thread)c Pull the loose ends of the filler cord to tighten it.Thread the each end of the cord through a hand-sewing needle. Then draw the both ends to the wrongside of the fabric and knot.NOTE:Cut the filler cord at both ends, if the filler cord isstitched on the fabric and cannot be pulled.e