Javes SLC-515SA User Manual

Javes SLC-515SA User Manual Manual pdf 12 page image

12Positioning your projectorChoosing a locationYour projector is designed to be installed in one of four possible installation locations:1. Floor in front of screen;2. Ceiling in front of screen;3. Floor at rear of screen;4. Ceiling at rear of screen.Your room layout or personal preference will dictate which installation location you select.Take into consideration the size and position of your screen, the location of a suitable power outlet, as well asthe location and distance between the projector and the rest of your equipment.If you use the projector with wireless function, there's no need to worry about data cable connections.This gives you the flexibility to site the projector anywhere in the room up to a range of 20m awayfrom your notebook, and switch between presentations on different notebooks instantly withoutfiddling with cablesI. Floor frontSelect this location with the projector placed near thefloor in front of the screen. This is the most common wayto position the projector for quick setup and portability.II. Ceiling frontSelect this location with the projector suspendedupside-down from the ceiling in front of the screen.Purchase the Thomson Projector Ceiling Mounting Kitfrom your dealer to mount your projector on the ceiling.III. Floor rearSelect this location with the projector placed near thefloor behind the screen.Note that a special rear projection screen is required.