- 13 -Power Light ContentBright red Power on and is on workingNo image, no signal, need switch the signal.Red Alarm signal (indicate it will be power off), turn off after power off. Turnon it when it gets cool.Green It is on workingPress “power” button to sleepSignal stoppingIt is switching the signalGreen to redPower offPress “power” button to power onRed to green Restore the former signalSection 2 MaintenanceProjector washing and replace the consumed parts are as follows:WashingWhen display effect change bad because of feculences, please washing the projector.Projector washingPlease lightly wipe the feculence on the crust of projector. If soiling is severe, dip softcloth in water or a neutral cleaner diluted in water, and wipe lightly after wring well. Then wipelightly with a soft, dry cloth.Note:Please do not use care, alcohol, thinner or other volatile substance. Otherwise, crust willchange figure or japanning falling off.Lens washingPlease lightly wipe lens with special paper which using in washing lens.Replace the consumed partsWe will hereby instruct how to replace the lamp.Time of replacingThis product is not designed for continuous use of long time. In the case of continuoususe for long time, the lamp’s lifetime will be shortening. Please replace the lamp when you