Javo Plus M2.0 User Manual
                            | |
Contents
| 
User manual for Javo Plus M2.0Version 22300779page 9 / 273.6. ControlsThe motor is operated using the controls on the control panel, which are as follows:A. Stop buttonB. Start buttonC. Reset buttonD. Emergency stopThe following buttons and connections are mounted on/fitted to the electrical cabinet:A. Drill ON/OFFB. Pot track ON/OFFC. Elevator ON/OFFD. Stopped / errorE. Main switchF. Pot dispenser continuous / non-continuousG. Timer ON/OFFH. Soil supply ON/OFFI. Main power socket INJ. Switched power socket OUTK. Constant power supply socket OUT (optional)Speed control potentiometers (optional):4. TransportFollow all the instructions given in this manual, in particular the instructions in the Safety Section.On delivery, a Javo engineer must be present to unload the machine from the truck or wagon.Do not move the machine until the power cable and compressed air line have been disconnected. Make sure that thehoses and cables are stowed properly.Check the machine's condition before moving the machine at the company's site (when it does not need to belifted). First check that the route is unobstructed so that the machine can be moved to the required position withoutproblems.Contact your supplier when the machine needs to be lifted for transport away from the company site, or call aprofessional shipping company.Do not move the machine until the transport belt (take-off conveyor) has been removed. The machine mustbe transported upright. The relative humidity must not be too high, so that there will be no condensation in themachine.Report any damage during or immediately after the delivery to the shipping company and to Nobels BV. Take all thenecessary measures to avoid further damage. |
Related manuals for Javo Plus M2.0
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine