Jazz SOUND PLATFORM SP2.1 Owner's Manual
SIMULATED SURROUNDThe SOUND PLATFORM utilizes advanced Digital Signal Processing (DSP) to create simulated surround soundfrom a stereo speaker configuration. The SOUND PLATFORM simulated surround can also be used for music.Press the SURR button on the SOUND PLATFORM IR Remote to turn the simulated surround ON. Front panelStatus LED will flash once.Press the SURR button on the SOUND PLATFORM IR Remote to turn the simulated surround OFF. Front panelStatus LED will flash once.OPERATING THE JAZZ AUDIO SOUND PLATFORMPAIRING AND SELECTING A BLUETOOTH SOURCEThe SOUND PLATFORM will pair without the need to enter a code, if the device implements Bluetooth v2.1 orlater. Legacy pairing is the only method available for Bluetooth v2.0 and older. Each device must enter a PINcode: ‘0000’ to complete pairing. To ensure that your device is compatible, look for the Bluetooth Music Icon onthe packaging, or go to: www.gadgetguide.bluetooth.comPAIRING A BLUETOOTH DEVICE1. Turn the SOUND PLATFORM and the Bluetooth device ON.2. Press the button on the SOUND PLATFORM IR Remote to select the Bluetooth Input. The front panel StatusLED flash twice, delay then repeat.3. On the device to be paired to the SOUND PLATFORM, turn Bluetooth ON. The Bluetooth controls are typicallyfound in the device’s ‘Settings’ or ‘Connections’ menu. If the Bluetooth device has previously been paired with theSOUND PLATFORM, and the SOUND PLATFORM has not been removed from the list of discovered devices, theBluetooth device should automatically sync with the SOUND PLATFORM. (Front panel Status LED solid blue.)4. Press the button on the SOUND PLATFORM IR Remote for a Bluetooth device that has not been paired withthe SOUND PLATFORM, or the SOUND PLATFORM has been removed from its list of discovered devices. TheSOUND PLATFORM will output a sync code that will be received by the Bluetooth device. The front panel StatusLED will flash rapidly until the Bluetooth device accepts the BT Code and pairs to the SOUND PLATFORM.5. The device will appear in the Bluetooth setup screen on the device being paired.6. The device should sync to the SOUND PLATFORM. The front panel Status LED will stop flashing andilluminate solid blue.7. If switching between hardwired sources and a paired Bluetooth device, the Bluetooth device will remain‘connected’ as long as the device has not been turned OFF or moved out of Bluetooth range. If the Bluetoothdevice has been turned OFF, simply turn it ON, navigate to the device’s Bluetooth setup and sync to the SOUNDPLATFORM |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine