Jenn-Air CVDX4180 Manual

Also see for Expressions CVDX4180: Service manual

Using Your CooktopOptional Cooktop Cartridges To Remove CartridgesThe grill accessory may be removed and an electric surface 1. Controls must be OFF and the cartridge should be cool.cooking cartridge may be installed, Cooktop cartridge options 2. Remove the air grille.include conventional coil, halogen, or radiant. Contact your 3. Lift the cartridge side next to the ventilation chamber untildealer or call 1-800-JENN-AIR to purchase, the top of the cartridge is about 3 inches above thein the receptacle could damage the terminal plug.I \ _ 4. To disengage terminal, hold cartridge by the ventilation(_) chamber side and gently pull from the terminal receptacle.Lift out when fully unplugged..... 5. Do not stack cartridges where they may fall or be dam-aged. Never store other materials on top of a glass-ceramic cartridge since this could damage or mar thesurface.Note: Remember to replace the air grille before using theventilation system.Home CanningTo Install Cartridges Whencanningwithelectriccartridges, usetheconventionalcoil1. If the grill grates, element, and/or grill liner pans are in cartridge only, Model AC110. Canning element accessory,place, remove before installing a cooktop cartridge. Clean Model A145A, makes it possible to use large oversized cannersbasin pan of any grease accumulation. (See page 12 for withtheconventionalcoilcartridge. Foradditionalinformation,cleaning recommendations.) refer to use and care rnanualpackaged with your cartridge.2. To install any of the optional cooktop cartridges, be surecontrols are OFF, basin pan is in place, and air grille isremoved.3. Position the cartIidge terminal plug towards the terminalreceptacle. Slide the cartridge towards thereceptacle untilthe cartridge terminal plug is completely engaged. Lowerthe opposite side of the cartridge into the cooktop until itis flush with the surface.4. Replace the air grille. Your cooktop is now ready to use.