Jenn-Air JEC3430H Installation Instructions Manual

Also see for JEC3430H: Installation instructions Installation instructions

Contents

3Product Dimensions Cabinet DimensionsIMPORTANT: If installing a range hood or microwave hoodcombination above cooking surface, follow the range hood ormicrowave hood combination installation instructions fordimensional clearances above the cooktop surface.NOTES: After making the countertop cutout, some installationsmay require notching down the base cabinet side walls to clearthe cooktop base. To avoid this modification, use a base cabinetwith sidewalls wider than the cutout.If cabinet has a drawer, a 5¹⁄2" (14.0 cm) depth clearance fromthe top of the countertop to the top of the drawer (or otherobstruction) in base cabinet is required.ABDFECA. Glass depth - black and white models - 21 ³⁄4" (55.2 cm)Glass depth - stainless steel models - 22 ¹⁄8" (56.4 cm)B. Glass width - 24" (60.9 cm) models - 23 13/16" (60.5 cm)Glass width - 30" (76.2 cm) models - 30 13/16" (78.4 cm)Glass width - 36" (91.4 cm) models - 36 5/16" (92.3 cm)C. Frame depth - 20 5⁄16" (51.6 cm)D. Frame width - 24" (60.9 cm) models - 21 59/64" (55.7 cm)Frame width - 30" (76.2 cm) models - 29" (73.7 cm)Frame width - 36" (91.4 cm) models - 34 7/16" (87.5 cm)E. Cooktop height with bottom heat shield - 3 7⁄8" (9.8 cm)Cooktop height lighted knobs - 4 15/16" (12.55 cm)F. Cooktop height including conduit (located at rear of cooktop, rightside) - 5" (12.7 cm)Cooktop height lighted knobs, including conduit (located at rear ofcooktop, right side) - 6 1/16" (15.4 cm)A. Location of Power Cord (length of power cord is48" (121.9 cm), including the conduit)ADAEIKGLCFBHJA. 24" (60.9 cm) on 24" models; 30" (76.2 cm) on 30" models;36" (91.4 cm) on 36" modelsB. Combustible area above countertop (shown by dashed box above)C. 30" (76.2 cm) minimum clearance between top of cooktopplatform and bottom of uncovered wood or metal cabinet(24" [61 cm] minimum clearance if bottom of wood or metalcabinet is covered by not less than ¹⁄4"[0.6 cm] flame retardantmillboard covered with not less than No. 28 MSG sheet steel,0.015" [0.04 cm] stainless steel, or 0.024" [0.06 cm] aluminumor 0.020" [0.05 cm] copper)D. 13" (33 cm) recommended upper cabinet depthE. 2" (5.1 cm)F. 20¹⁄2" (52.0 cm) recommended cutout.Will fit in cutout from 20³⁄8"-209⁄16" (51.8-52.2 cm).G. 18" (45.7 cm) minimum clearance from upper cabinet tocountertop within minimum horizontal clearances to cooktopH. Junction box or outlet: 7" (17.8 cm) minimum from top ofcountertopI. Junction box or outlet: 9" (23.0 cm) maximum from right sideof cabinetJ. 29¹⁄2" (74.9 cm) recommended cutout on 30" (76.2 cm) models.Will fit in cutout from 29 ¹⁄16"-29 9⁄16" (73.8-75.1 cm) on 30"(76.2 cm) models.35¹⁄2" (90.2 cm) recommended cutout on 36" (91.4 cm) models.Will fit in cutout from 34 9⁄16"-35 9⁄16" (87.8-90.3 cm) on36"(91.4 cm) models.22 5/16" (56.67 cm) recommended cutout on 24" (61.0 cm)Will fit in cutout from 22 1/4" - 22 3/7" (56.4 - 57.0 cm) on24 (61.0 cm) models.K. 2 1/2" (6.35 cm) minimum distance to nearest left and right sidecombustible surface above cooktopL. 1 1/2" (3.81 cm) minimum clearance between back wall andcountertop