Jenn-Air JED3536WB01 Use & Care Manual

Contents

Jenn-Air JED3536WB01 Use & Care Manual Manual pdf 5 page image

COOKTOP USEFire HazardTurn off all controls when done cooking.Failure to do so can result in death or fire.The controls can be set to anywhere between HI and LO.To Use:Push in and turn knob to desired heat setting.Use the following chart as a guide when setting heat levels.SETTING RECOMMENDED USEHi • Bring liquid to a boil.Med Hi • Hold a rapid boil.Medium High • Quickly brown or sear food.Med • Maintain a slow boil.Medium • Fry or saute foods.• Cook soups, sauces andgravies.If the cooktop is on when a power failure occurs, the Hot SurfaceIndicator Light will remain on after the power is restored to thecooktop. It will remain on until the cooktop has cooledcompletely.Cooktop On Indicator LightEach cooktop has a Cooktop On Indicator light. When the controlknob is on, the light will glow.uuc F pe,,-4Jsc E®men'The dual-size and triple-size elements offer flexibility dependingon the size of the cookware. Single size can be used in the sameway as a regular element. The dual and triple sizes combinesingle, dual and outer element and are recommended for largercookware, large quantities of food, and home canning.Triple Element (on some models)A. Single sizeB. Dual sizeC. Triple sizeDual ElementMed Lo Stew or steam food.Medium Low Simmer.LoDual/Triple CircuitElementsMeltWarm ZoneKeep cooked foods warm.Home canning.Large-diameter cookware.Large quantities of food.Melt chocolate or butter.Keep cooked foods warmI EMEMBER: When cooktop is in use, the entire cooktoparea may become hot. IHot Surface Indicator LightThis unit features a Hot Surface Indicator Light. The Hot SurfaceIndicator Light will glow as long as any surface cooking area istoo hot to touch, even after the surface cooking area(s) is turnedoff.A. Single elementB. Dual elementTo Use SINGLE:1. Push in and turn knob from the OFF position to the SINGLEzone anywhere between MELT and HI.2. Turn knob to OFF when finished.To Use DUAL and TRIPLE:1. Push in and turn knob from the OFF position to the DUAL orTRIPLE zone anywhere between MELT and HI.2. Turn knob to OFF when finished.