Jenn-Air JFC2290VEM User Instructions

Contents

133. Clean the exterior surfaces.Painted metal: Wash painted metal exteriors with a clean,soft cloth or sponge and a mild detergent in warm water.Rinse surfaces with clean, warm water and dry immediately toavoid water spots.Stainless steel: Wash stainless steel surfaces with a clean,soft cloth or sponge and a mild detergent in warm water.Rinse surfaces with clean, warm water and dry immediately toavoid water spots.NOTE: When cleaning stainless steel, always wipe in thedirection of the grain to avoid cross-grain scratching.4. There is no need for routine condenser cleaning in normalhome operating environments. If the environment isparticularly greasy or dusty, or there is significant pet traffic inthe home, the condenser should be cleaned every 2 to3 months to ensure maximum efficiency.If you need to clean the condenser:■ Remove the base grille.■ Use a vacuum cleaner with a soft brush to clean the grille,the open areas behind the grille and the front surface areaof the condenser.■ Replace the base grille when finished.5. Plug in refrigerator or reconnect power.Changing the Light BulbNOTE: Not all appliance bulbs will fit your refrigerator. Be sure toreplace the bulb with an appliance bulb of the same size, shape,and wattage (no greater than 40 watts).Changing the Refrigerator Light Bulb1. Unplug the refrigerator or disconnect power.2. Slide the light shield toward the back of the compartment torelease it from the light assembly.3. Replace burned-out bulb(s) with appliance bulb(s) no greaterthan 40 watts.4. Replace the light shield by inserting the tabs on the shield intothe liner holes on each side of light assembly. Slide the shieldtoward the front until it locks into place.NOTE: To avoid damaging the light shield, do not force theshield beyond the locking point.5. Plug in refrigerator or reconnect power.Changing the Freezer Light Bulb1. Unplug refrigerator or disconnect power.2. Remove the burned-out bulb and replace it with an appliancebulb no greater than 40 watts.3. Plug in refrigerator or reconnect power.Electrical Shock HazardPlug into a grounded 3 prong outlet.Do not remove ground prong.Do not use an adapter.Do not use an extension cord.Failure to follow these instructions can result in death,fire, or electrical shock.WARNING