Jenn-Air JGD8130ADW Product Dimensions

Contents

duct locations

Jenn-Air JGD8130ADW Product Dimensions Manual pdf 1 page image

Minimum horizontalclearance between theedge of the applianceand combustibleconstruction extendingfrom the cookingsurface to 18" abovethe cooking surface is8" (see solid areas).Overall DimensionsCut-Out DimensionsTop View (not to scale)Cut-Out width:Cut-Out depth:Overall depth:Overall width:Countertop View(not to scale)Side View (not to scale)Front Viewof Cooktop andAttached Blower(not to scale)Provide 2" min. cabinetclearance to motor forcooling purpose. 6"recomended for servicing.3 1/2"11 13/16"13 3/4"13 13/16"MinimumclearancerequiredGrease containerCabinet RequirementsWall View(not to scale)Distance from top of counter to bottom of unit:Min. spacing from cooktop edge to nearestvertical combustible wall to the RIGHT:Min. spacing from cooktop edge to nearestvertical combustible wall to the LEFT:Minimum spacing to front edge of counter:Min. spacing from cooktop edge to nearestvertical combustible wall to the REAR:Minimum distance between cooktopand cabinet directly above:Minimum distance between countertopand adjacent cabinet above:Minimum width of cabinet directly above:Maximum depth of cabinets directlyabove and adjacent:18"13"30"30"1 7/8"15/16"8"8"21"29"see below21 3/4"30"18"30"30"21"29"see below 21 3/4"30"• Cabinetry over cooktop : 30" minimum clearancebetween the top of the cooking surface and the bottomof an unprotected wood or metal cabinet. 24" minimumwhen bottom of wood or metal cabinet is protected bynot less than 1/4" flame retardant millboard coveredwith not less than no. 28 MSG sheet steel, 0.015"stainless steel, 0.024" aluminum or copper.• To eliminate the hazard of reaching over heatedsurface units, cabinet storage space located abovethe surface units should be avoided. If cabinet storageis to be provided, the hazard can be reduced byinstalling a range hood that projects horizontally aminimum of 5" beyond the bottom of the cabinets.• Countertop must be supported within 3" of cutout.• Radius corners of cutout and file to insure smoothedges and prevent corner cracking (1/4" radius).• Blower can be swiveled 90°.See page 2-3 for additional informationwww.dexpress.com DIMENSION EXPRESS Fax on Demand (775) 833-3600• Dimensions (Actual Size) •• NEVER reuse Data Sheets. Data Sheets are subject to change without • Call Dimension Express if you have any questions at (775) 833-3633 •notice. Dimension Express is a FREE service bureau and is updated daily, • Always refer to a current Code at a Glance or manufacturer directory •it makes far more sense to spend the time necessary to request new Data • Data Sheet codes change on the first of odd numbered months at 12:01am •Sheets for each project, as opposed to the problems, time, costs, and risksassociated with reusing old Data Sheets.30" Convertible Cooktops:JGD8130ADW, JGD8130ADS and JGD8130ADB• Product Model Number (s): •Subject to change without notice. This system is designed tobe updated daily if necessary. Dimension Express is notresponsible for use of superseded, voided, or outdated datasheets. Because of the difficulty or impracticability of deter-mining actual damages, liability of Dimension Express shallnot exceed $50.00.Copyright © Dimension Express, 2002.This Data Sheet Includes Information OnBN182.34 • A321B149C150 • • 032603 • 95657 • 67301• Additional Information •321Jenn-Air

/ 3

Related manuals for Jenn-Air JGD8130ADB