Jenn-Air JGR8855 User Manual

Also see for JGR8750: User guide

Contents

Jenn-Air JGR8855 User Manual Manual pdf 9 page image

Surface CookingSurface ControlsAutomatic Oven Turn Off OptionThe oven will automatically turn off after 12 hours, if youaccidentally leave it on. You can deactivate this feature, ifdesired.To Eliminate 12 Hour Turn Off1. Press the Clock pad and hold for three seconds or until"12" appears in the display. The indicator word TIME willflash in the display.2. Press any number pad until 8888 appears in the display.Current time of day will reappear in the display after four Pilotless Ignitionseconds.To restore: Press the Clock pad and hold for three seconds Pilotless ignition eliminates the need for a constant standingorunti18888 appears. Press "l " numberpad. "12" will appear pilot light. Each surface burner has a spark ignitor. Whenbriefly in the display followed by the current time of day. cleaning around the surface burner use care. If cleaning clothshould catch the ignitor, it could damage it preventing igni-tion.Oven Temperature Adjustment Option Ifthesurfaceburnerdoesnotlight, checkifignitorisbroken,soiled or wet. If clogged, clean the small port beneath theIf you think the oven should be hotter or cooler, you can adjustit yourself. To decide how much to change the thermostat, set ignitor using straight pin.the oven temperature 25°F higher or lower than the tempera- e_e _Pture in your recipe, then bake. The results of the "test" shouldgive you an idea of how much to adjust the thermostat.To adjust the thermostat: PoRts1. Press the Bake pad. _ _-IaN_TOR2. Enter 550° by pressing the number pads "5, 5, 0". PORTBELOWIGNITOR3. Press and hold the Bake pad for several seconds until 0°appears in the display.4. Press any number pad to change the temperature. Each Surface Control Knobstime a pad is pressed, the temperature changes by 5°E Use to turn on the surface burners. AnPress repeatedly to reach +35°F. Continue pressing to infinite choice of heat settings is availablereduce the temperature up to -35°F. from Lo to Hi. At the Hi setting a detent5. When you have made the adjustment, press the Stop/Clear or notch may to felt. The knobs can be setpad and the time of day will reappear in the display. The on or between any of the settings.oven will now bake at the adjusted temperature. Graphics to the left of the knob identify which burner theIt is not necessary to readjust the oven temperature if there is knob controls. For example, the graphic below shows thea power interruption. This adjustment will not affect broil or right rear burner location. _clean temperatures.